Modern EFI systems are all the rage these days, including those from FiTech. But for those looking for a little bit of additional information from what’s going on under the hoods were at something of a disadvantage. Now, they have an edge, thanks to the help of our friends over at Dakota Digital.
![](https://b93391.p3cdn1.secureserver.net/wp-content/uploads/2024/06/CCV25-300x250-TM.jpg" alt="" width="300" height="250" /></a>)
Official Release:
Dakota Digital BIM-01-2 FTCH
The BIM-01-2-FTCH is designed to read the engine information from the FiTech LS, TBI and TCU kits. The BIM-01-2-FTCH module is a direct plug in using the supplied 2 or 4 pin harness for simple connection to the FiTech EFI system.
The BIM-01-2-FTCH will collect and output the following information to Dakota Digital Instrument Systems, shown within the chart below:
*The BIM-01-2-FTCH is designed to decode the information provided by the FiTech LS, TBI and TCUand supply this information to the VFD3 rev. G, VHX, RTX and HDX control box instrument systems only.
**Compatible Dakota Digital instrument system: VHX, HDX, RTX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are
not capable of BIM connectivity.
Features:
- Compatible with Dakota Digital VHX, HDX, RTX and VFD3 systems
- Designed to read the engine information from the FiTech LS, TBI and TCU kits
- BIM-01-2-FTCH module is a direct plug in using the supplied 2 or 4 pin harness for simple connection
Rick Seitz is the owner and founder of AutoCentric Media, the parent company to Timeless Muscle Magazine, and has a true love and passion for all vehicles. When he isn’t tuning, testing, or competing with the magazine’s current crop of project vehicles, he’s busy tinkering and planning the next round modifications for his own cars.
