Video: Earl’s Professional Flaring Tool
When you need to get the flaring job done right, Earl’s professional flaring tools are what you need to grab for. These make easy work out of flaring.
Dakota Digital Releases Retrotech Series Instrumentation
Dakota Digital is proud to unveil the Retrotech series of instrumentation!
Flex-a-Lite Releases Extruded Core Radiator Line
Flex-a-Lite’s new line of Extended Tube Core Performance Radiators represents the future of radiators.
In the Shop with Miller’s Millermatic 211 MIG Welder
The Millermatic 211 is an extremely popular MIG inverter welder amongst gearheads, partially due to its versatility, flexibility, and of course portability, but we knew it had to go beyond that to come so highly ...
Signature Series ShowCase by CarCapsule Offers Ultimate Vehicle Protection
The Signature Series ShowCase CarCapsule has a checkered flag base mat, white PCV exterior, ultra wide viewing panels, and LED lighting that changes colors to your preference for display.
Heatshield Products Helps to Eliminate Bothersome License Plate Rattle
A new product from Heatshield will make those with loud exhaust systems or stereos, and pretty much the majority of the drivers on the road a little less annoyed with their car’s sounds. Their new ...
Vintage Air Adds New Features to 1967-1968 F-Body SureFit Kits
For 1967 and 1968 GM F-Bodies, the SureFit system has been upgraded to incorporate features for improved performance and appearance.
Heidts and Woody’s Hot Rodz Launch Modernized Tri-Five Chassis
As a measure to bring Tri-Five Chevys into the modern era of suspension, Woody’s Hot Rodz is now offering a Heidts equipped chassis for 1955-1957 Chevys.
VIDEO: Edelbrock’s Next Generation AVS2 Carburetors
Edelbrock’s AVS2 Series carburetors is the next generation of a long line of Edelbrock carburetors. These AVS2 carbs feature primary booster that have an annular flow and new calibration for improved performance throughout.
Holley Develops 12-Bolt VR Series Fuel Cell Pump Modules
Holley’s new 12-Bolt VR Series Fuel Cell Pump Modules can easily support extreme horsepower applications. They are made to handle up to 4,400 horsepower for EFI engines, and 4,800 horsepower for carbureted engines.
Aldan American’s Coil-Over Kit for Ford Muscle
Aldan American spotlights their classic Ford product line.
Edelbrock Designs Victor II EFI Intake for Gen III Hemi
Your late model Hemi engine swap is about to get a lot more powerful thanks to Edelbrock. The new Victor II EFI intake manifold for Gen III Hemi engines is the first of its kind ...
New Ignition Cable Sets for 426 Hemi From Vintage Wires
Vintage Wires, an ididit brand, is making finding the right set of ignition wires for your 426 Hemi engine a breeze with modern performance and old-school looks.
Classic Industries Acquires California Mustang
Classic Industries is a leading name in parts for project cars, specializing in offering hard to find restoration parts. They have recently acquired another major name in the parts industry, California Mustang.
Dakota Digital Releases VHX Instruments for 1963-1964 Cadillac
The newest addition to the Dakota Digital catalog is an extension of their extremely popular VHX Instruments for the 1963-1964 Cadillac.
VIDEO: Flex-A-Chill 3000 Airmover
The Flex-A-Chill 3000 from Flex-A-Lite is the Perfect Airmover for the race track, your garage and the dyno cell; see it in action in this video.
Introducing the New EZ Electric Power Steering System By American ...
Giving your muscle car power steering just became a much easier task with American Powertrain’s bolt-on EZ Electric Power Steering system.
Holley Sniper EFI 2300 Two-Barrel Now Available in Three Finishes
In addition to their ease of use, affordability, and straightforward installation, the Holley Sniper EFI 2300 systems now come in three different finishes.
VIDEO: Everything About QuickJack Safety Locks
The QuickJack was made with 14-gauge welded steel frames and automatic safety locks that engage at both mid and max levels.
VIDEO: Breaking-In Your Hydraulic Flat Tappet Camshaft
Resident Edelbrock expert August Cederstrand walks us through the correct break-in methods for flat tappet camshafts, and what are the best practices to get the most out of your new setup.
Lava Motor Mount Shield Helps Prevent Motor Mount Damage
The new Lava Motor Mount Shield from Heatshield Products wrap around your motor mounts to offer heat protection from your engine bay.
FUELAB Releases New Fuel Surge Tank Systems
Racers of any kind including drifters, drag racers, off-roaders, road racers, auto-crossers, or anything else should invest in Fuelab's Fuel Surge Tank system to make sure their engine is getting properly fed with fuel.
Hooker Releases New Street Tease Line of Exhaust Cut-Outs
These new exhaust cutouts are available in four different configurations, including two different sizes, and options for single or dual exhaust.
Heidts Adds Chassis Engineering to Their Family of Companies
Heidts Engineering is known for their innovation in the chassis and suspension parts, and their newest acquisition is going to help them expand their product lines and reach new customers.
Vintage Air Releases Billet Aluminum Crank and Water Pulleys for ...
Made for 289s and 302, both the new crankshaft pulley and water pump pulley by Vintage Air are billet aluminum and made for easy installation.
Flaming River Is Now An Authorized Littlefuse Dealer
Flaming River's most recent expansion will include Littlefuse products as a part of their catalog is going to make your project more complete.
Dakota Digital Releases HDX Universal Gauge Systems
Dakota Digital's HDX takes personalization and usability to a whole new level, while still utilizing your favorite features from hugely popular VHX series.
VIDEO: Shop Talk features Concept One’s Explains the Design Specifications
Kevin from Concept One Pulleys fully explains the design specification of their famous Pulley Systems on a recent episode of Shop Talk.
VIDEO: Shop Talk features Concept One’s Custom Thermostat Housing
In a recent episode of Shop Talk, Kevin from Concept One Pulleys fully explains the Concept One custom thermostat housing.
Lloyd Mats Releases 14 Model Year Specific Logos for C1, ...
Lloyd Mats' newest addition to their catalog includes model year specific logos for the first three generations of the Corvette.