VIDEO: Flex-A-Chill 3000 Airmover
The Flex-A-Chill 3000 from Flex-A-Lite is the Perfect Airmover for the race track, your garage and the dyno cell; see it in action in this video.
Classic and Modern Corvette Duo Up For Grabs Through Dream ...
Both of these machines have been built by Lingenfelter, one model is a 1965 Sting Ray and the other is a 2018 Grand Sport. These cars represent the best of the classic era and modern ...
Car Feature: 1973 Plymouth Duster Project Recycled
To put it in simple terms, a C6 Corvette and 1973 Plymouth Duster are fused together with parts from both to make Project Recycled.
VIDEO: Everything About QuickJack Safety Locks
The QuickJack was made with 14-gauge welded steel frames and automatic safety locks that engage at both mid and max levels.
VIDEO: The Last Vanishing Point Challenger
The only way to experience one of these screen-used cars from Vanishing Point is to check out the clone made for the 1996 tv remake, which is exactly what this car is we see in ...
VIDEO: The Silver Bullet ’67 Plymouth GTX: Factory-Sponsored Street Racer
This vintage video tells the story of a very special Plymouth GTX.
VIDEO: Breaking-In Your Hydraulic Flat Tappet Camshaft
Resident Edelbrock expert August Cederstrand walks us through the correct break-in methods for flat tappet camshafts, and what are the best practices to get the most out of your new setup.
VIDEO: Adjusting Pushrod Guideplates on Your Small Block Chevy
Properly adjusting each pushrod guideplate is vital for ensuring valvetrain stability. August Cederstrand from Edelbrock is your guy for getting this simple, yet important, part of any build right.
VIDEO: A Close Look at Steve Beckās 1965 GT350
Steve Beck, founder of Checkpoint Automotive, has a 1965 Ford Mustang Shelby that he bought on his 18th birthday for $900, so this car has been with him his entire adult life.
VIDEO: Home-Built 1968 Charger RTR Impresses on Jay Leno’s Garage
Johan Eriksson's '68 Charger is so trick, it's hard to believe that it was built entirely in his garage!
VIDEO: 1969 Mercury Cyclone CJ
This 1969 Mercury Cyclone CJ had all the markers of an incredible muscle car; it came with a huge 428 Cobra Jet engine, in a mid-size body.
VIDEO: Four Boss 429 Mustangs at Grand National Roadster Show
Spotting Mustangs at a car show isn't rare, unless they're FOUR Boss 429s!
Car Feature: 1978 Fire Am Tribute Car With A Modern ...
Sheriff Buford T. Justice would have loved to get ahold of Jim Haller's tuned Trans Am back in the day, and he wouldnāt have had a chance of catching this Fire Am!
VIDEO: Lost Prototype Ford Boss Bronco of 1969
The 1969 Ford Bronco Boss Prototype was made by Kar-Kraft for Ford, and you probably never knew existed until it resurfaced not too long ago.
VIDEO: Jay Lenoās Garage Welcomes Jeff Dunhamās 1970 Plymouth Superbird
A pristine example of a 1970 Plymouth Superbird muscle cars happens to be owned by puppeteer comedian, Jeff Dunham, and he recently stopped by Jay Lenoās Garage.
Car Feature: A Totally Modernized 2nd-Gen Firebird
When it came time to transform his stunning 2nd-gen, Nathan took a lot of what he knew about modern GM muscle, and tolled it into his Firebird Espirit.Ā
VIDEO: Project Shop Rag 1965 El Camino
Project āShop Ragā is a father/son project was spotted at the recent LS Fest and gained a lot of attention for their El Caminoās looks and performance.
VIDEO: 2017 OPTIMA Ultimate Street Car Invitational
At the 2017 OPTIMA Ultimate Street Car Invitational, drivers were tasked to run their vehicles through a series of challenges, and here are the winners.
VIDEO: Shop Talk features Concept Oneās Custom Thermostat Housing
In a recent episode of Shop Talk, Kevin from Concept One Pulleys fully explains the Concept One custom thermostat housing.
VIDEO: Custom ’71 Mach Foose at SEMA!
Chip Foose shows off his radical 1971 Mach 1 that's way more than meets the eye!
VIDEO: Edelbrock Greatly Expands Their Catalog in 2017
At the 2017 SEMA show, the Edelbrock, and not just with people, but with new parts, it was a highlight of the trip this year!
VIDEO: MAHLE Motorsport Walks Us Through New Products for 2017
Trey McFarland of MAHLE Motorsports gives us a closer look at their latest offerings when we stopped by at the 2017 SEMA show.
VIDEO: Aldan American Introduces New Shock and Coilover Options
Garrett Harmola of Aldan America Suspension walks us through all of the exciting new parts being added to their catalog at the 2017 SEMA show.
VIDEO: Original Parts Group Shows Off New Parts at SEMA
OPG has been a great source that we turn to for builds we feature on our site, here are the new parts we found when we met up with them at the SEMA show.
VIDEO: Magnuson Wows at SEMA Show
Our friends over at Magnuson really outdid themselves with their display at the 2017 SEMA show, and weāre thrilled that we got a firsthand look.
VIDEO: Will the Corvair Kill You?
The guys from Hagerty decided to find out the truth about the safety of the Corvair, and find out if this car is really bloodthirsty, or not.Ā
VIDEO: Flex-A-Liteās Exciting New Products
Rolling into 2018, Flex-A-Lite has a few big product lines to add, and we got to check them out while we were at the 2017 SEMA show in Las Vegas.Ā
VIDEO: The Latest From Dakota Digital
Dakota Digital's new product lineup moving into 2018 offers even more versatility and are easier to use than ever before.Ā
VIDEO: HEIDTS Brings Out Their Latest Hardware to SEMA 2017
HEIDTS Suspension showcases their F-body line of hardware at SEMA 2017!
VIDEO: SEMA 2017 — The Ringbrothers AMX Stunned the Crowd ...
The Ringbrothers unveiled their Javelin AMX in the Prestone booth of this year's SEMA Show!